Radio Frequency Signal Base

for Wireless Inter-connection of Smoke & Heat detector


Product Introduction:
The-SSA-RF-01 RF Signal Base is used to transmit and receive signals wirelessly while connected with Starkin's Smoke or Heat detectors.When it receives an RF alarm signal from another SSA-RF-01 RF Base, the attached smoke or heat detector will sound. It therefore eliminates the need to run long interconnect wires between all the smoke / heat detectors on different floors and in different rooms.

Main features:
  • Totally wireless communication
  • Could interconnect up to 20 units. When one unit sound,
          it will emit signal to others with the same coding and start it to alarm.
  • Two sets dip switches for coding the transmit and receive
          frequency to prevent interference with other RF base.
  • Low battery warning
  • DIY unit, easy installation
  • 5 years guarantee
  • Supplied with 4x1.5V batteries, wall plugs & screws


    Specification:
  • Power supply : DC6V (4 x 1.5v batteries)
  • Transmit & Receive frequency : 433.92 MHz
  • Transmit & Receive distance : ≥50meters
  • Max wireless inter-connection : 20 units
  • Static current : 250 uA
  • Operation current : <10 mA
  • Ambient humidity : <93%RH
  • Working temperature : 0ºC~40ºC
  • Low battery remain : 7~15 days
  • Size : ø126 x 31mm
    		•
          CE 0678 Approval 0678    R&TTE



    SSA-01RF smoke detector with RF base
    SSA-01RF    		SSA-01RF smoke detector with RF base
    SSA-02RF    		 SSA-H-01RF heat detector with RF base
    SSA-H-01RF
    RF Signal Base with Smoke detector & Heat detector